A few good reasons to get a professional boiler maintenance service in London

What can be more irritating than the following situation: it’s freezing cold outside. You are sitting inside your cosy home when suddenly, the boiler goes kaput. This can be a helpless situation, especially if there is no help at hand or if it is an odd time of the day or night.

Boiler maintenance is an ongoing job and the boiler condition must be reviewed periodically to ensure its smooth functioning. There are various snags that can occur with a boiler.

In steam boilers, there are chances of cracks appearing on the boiler plate. These cracks may cause leaking and its repair is essential. It is done by drilling small holes at the end of the crack so that the spread of the crack is stopped. The crack is then covered with a patch after caulking it. But this is just an immediate measure to ensure the boiler is functioning smoothly. In case the crack develops beyond the holes drilled, the boiler needs to be repaired yet again. The repair work should be done under the greatest of care. The steam boilers should be under zero pressure and out of service during the repair.

The boiler could also develop leaks due to many reasons resulting from seals, relief valves or the boilers cast iron sections. If it is leaking from the temperature and pressure relief valve it’s either because the boiler has too much water pressure in it or the boiler is heating the water too much. Boiler repairs should be carried out by authorized and experienced personnel only and they should follow certain rules when attempting a repair. Firstly, they should wear personal protective equipment such as hard hats, heavy-duty work gloves, eye protection and coveralls. This is to protect them against any possible accident that may happen while the repair work is going on. When entering a boiler for service or repair, authorized boiler repair workers should treat the vessel as a permit-required confined space.

With a little bit of care and regular maintenance, the boiler is bound to stay in a proper working condition for a long time.

Back to DIY articles